Compare Products

Honda Marine BF150 L iST
Honda Marine BF150 L iST

Specs

General Information

Manufacturer
Honda Marine
Honda Marine
Model
BF150 L iST
BF150 L iST
Model Code
NA
NA
Color
Aquamarine Silver
Aquamarine Silver

Electrical

Battery
Charging Power - 40A
Charging Power - 40A
Alternator
Electric Start - 55A total
Electric Start - 55A total

Engine

Cylinders
4
4
Engine Type
4-stroke DOHC / 16-valve
4-stroke DOHC / 16-valve
Ignition
MicroComputer Programmed
MicroComputer Programmed
Starting
Electric
Electric
Exhaust
Through hub
Through hub

Measurements

Power
150 Horsepower
150 Horsepower
Displacement
2,354 Cubic Centimeter
2,354 Cubic Centimeter
Bore x Stroke
3.4 x 3.9 in. (87 x 99 mm)
3.4 x 3.9 in. (87 x 99 mm)
Shaft Length
20"
20"
Width
2' 0"
2' 0"
Dry Weight
487 lbs
487 lbs

Operational

Fuel Type
Unleaded
Unleaded
Full Throttle RPM Range
5,000 - 6,000 RPM
5,000 - 6,000 RPM
Fuel Induction
Programmed fuel injection
Programmed fuel injection
Lubrication
Wet sump
Wet sump
Cooling
Water
Water
Gear Ratio
2.14:1
2.14:1
Gear Shift
F-N-R
F-N-R
Trim System

Range - -4° to +16°

Power Trim & Tilt - Standard

Range - -4° to +16°

Power Trim & Tilt - Standard

Instrumentation

Oil Pressure Alert

Temperature Alert

Rev-Limiter

Speedometer Pickup

Oil Pressure Alert

Temperature Alert

Rev-Limiter

Speedometer Pickup

Other

Additional Colors

Aquamarine Silver

Grand Prix White

Aquamarine Silver

Grand Prix White

Features

Features

  • HONDA'S IST (INTELLIGENT SHIFT AND THROTTLE): Honda's exclusive Intelligent Shift and Throttle (iST) command and control system delivers superb control plus plug-and-play installation of Honda Marine products and third-party controls and devices. iST offers multi-engine applications, with fine tuning of throttle settings at any speed, enhanced docking and slow speed control, and a simple, easy to understand user interface. Available on select BF115, 140, and 150 models.
  • VTEC® - SMOOTH ACCELERATION AND POWER: Featured on the 150, Honda’s Variable Valve Timing & Lift Electronic Control (VTEC®) system provides power where and when you need it. VTEC gives you a broader, flatter torque curve and smooth power delivery throughout the engine’s operating range. The result is a superior combination of power, torque and fuel economy. VTEC is the modern replacement for displacement.
  • INSTANT ACCELERATION: BLAST® SYSTEM: Boosted Low Speed Torque, or BLAST, improves acceleration at low speeds. A quick movement of the throttle control activates the BLAST® system, advancing the ignition curve aggressively. "Hole Shot" is vastly improved as more horsepower gets the hull up on plane quicker.
  • DUAL STAGE INDUCTION - BREATHING EASIER IMPROVES PERFORMANCE: The BF150 is equipped with Dual Stage Induction to maximize air input for combustion.
  • DUAL OVERHEAD CAM (DOHC) - HIGH HORSEPOWER, LOW MAINTENANCE: A powerful, compact 24-valve DOHC design creates more valve lift to pull in more air for increased horsepower. Low-maintenance design allows easy adjustment of the rocker arms. No multiple shims or trial-and-error adjusting needed.
  • LEAN BURN CONTROL® - SUPERIOR FUEL EFFICIENCY: Lean Burn Control® increases fuel efficiency by allowing combustion to operate on a leaner air/fuel mixture. At cruising speed, this engine runs on up to 20% less fuel* than others in its class.*Based on EPA Specific Fuel Consumption Mode.
  • MULTI-PORT PROGRAMMED FUEL INJECTION (PGM-FI) - POWERFUL PERFORMANCE: Programmed Fuel Injection delivers the precise amount of fuel/air to each cylinder. The result is easy starts and instant throttle response with superior fuel efficiency.
  • SIMPLIFIED MAINTENANCE: The little things make a big difference. The BF150 is designed to reduce maintenance time for routine tasks like oil and filter changes.
  • ENGINE ALERT SYSTEM - KEEPS YOU INFORMED: The ECM monitors vital engine functions and prevents engine damage by alerting the operator of: Overheating, Water in Fuel, Low Oil PSI, Battery, Over-Rev, Critical Engine Function.
  • IMPROVED CORROSION RESISTANCE: Repositioned anodes and a new bolt coating boost corrosion resistance
  • 4-FRONT CORROSION PROTECTION SYSTEM - FIGHTS THE ELEMENTS: A patented, "Double Sealed" multi-layered paint process. Sacrificial anodes and stainless steel technology, along with waterproof connectors, all enhance corrosion protection.
  • NMEA 2000 - ON-BOARD CONNECTIVITY: NMEA 2000 protocols allow engine data to be interfaced with on-board systems and systems displays, such as sonar or GPS.
  • PROVEN HONDA QUALITY: Our outboards share many technologies and components used in Honda vehicles, with all the benefits of years of proven Honda engineering, precision manufacturing and reliability.
  • TRUE 5 WARRANTY: Honda's True 5 Warranty is the best in the business. This transferable, non-declining warranty is the same on the last day as it is on the first.
  • SUPERIOR BATTERY CHARGING - MORE USABLE POWER: Honda's proven "on demand" 55 amp belt-driven alternator reduces heat buildup and provides 40 amps of battery charging capability.
  • VARIABLE SPEED TROLLING SWITCH: A variable speed trolling switch makes fishing easy and convenient. Simply push the toggle switch to adjust the trolling speed in 50 RPM increments from 650 RPM to 1000 RPM. Standard on iST models.
  • ENGINE COMMAND MODULE - OPTIMUM PERFORMANCE: The ECM receives constant input from 18 different sensors to deliver instant starts, smooth operation, strong performance and excellent fuel efficiency.
  • 3-WAY COOLING SYSTEM - COOL RUNNING DURABILITY: Three separate cooling systems keep the cylinder heads running cooler for long-term durability.
  • CONVENIENT SINGLE LATCH COWL: A single front-mounted latch combines with 4 securing points to ensure a water-tight seal.
  • FRESH WATER FLUSHPORT: Flushes debris and saltwater out of the engine, extending the life of the outboard.
  • ULTRA LOW 3 STAR CARB EMISSIONS: Environmentally conscious technology. All Honda Marine engines exceed the highest CARB 3-Star rating to meet the rigorous California Air Resource Board's standards.
  • COUNTER ROTATION AVAILABLE: Counter rotating models are available for multiple engine applications. These models improve efficiency, hull maneuverability and decreases driver fatigue.
  • Available in 20 and 25 inch shaft lengths

Features

  • HONDA'S IST (INTELLIGENT SHIFT AND THROTTLE): Honda's exclusive Intelligent Shift and Throttle (iST) command and control system delivers superb control plus plug-and-play installation of Honda Marine products and third-party controls and devices. iST offers multi-engine applications, with fine tuning of throttle settings at any speed, enhanced docking and slow speed control, and a simple, easy to understand user interface. Available on select BF115, 140, and 150 models.
  • VTEC® - SMOOTH ACCELERATION AND POWER: Featured on the 150, Honda’s Variable Valve Timing & Lift Electronic Control (VTEC®) system provides power where and when you need it. VTEC gives you a broader, flatter torque curve and smooth power delivery throughout the engine’s operating range. The result is a superior combination of power, torque and fuel economy. VTEC is the modern replacement for displacement.
  • INSTANT ACCELERATION: BLAST® SYSTEM: Boosted Low Speed Torque, or BLAST, improves acceleration at low speeds. A quick movement of the throttle control activates the BLAST® system, advancing the ignition curve aggressively. "Hole Shot" is vastly improved as more horsepower gets the hull up on plane quicker.
  • DUAL STAGE INDUCTION - BREATHING EASIER IMPROVES PERFORMANCE: The BF150 is equipped with Dual Stage Induction to maximize air input for combustion.
  • DUAL OVERHEAD CAM (DOHC) - HIGH HORSEPOWER, LOW MAINTENANCE: A powerful, compact 24-valve DOHC design creates more valve lift to pull in more air for increased horsepower. Low-maintenance design allows easy adjustment of the rocker arms. No multiple shims or trial-and-error adjusting needed.
  • LEAN BURN CONTROL® - SUPERIOR FUEL EFFICIENCY: Lean Burn Control® increases fuel efficiency by allowing combustion to operate on a leaner air/fuel mixture. At cruising speed, this engine runs on up to 20% less fuel* than others in its class.*Based on EPA Specific Fuel Consumption Mode.
  • MULTI-PORT PROGRAMMED FUEL INJECTION (PGM-FI) - POWERFUL PERFORMANCE: Programmed Fuel Injection delivers the precise amount of fuel/air to each cylinder. The result is easy starts and instant throttle response with superior fuel efficiency.
  • SIMPLIFIED MAINTENANCE: The little things make a big difference. The BF150 is designed to reduce maintenance time for routine tasks like oil and filter changes.
  • ENGINE ALERT SYSTEM - KEEPS YOU INFORMED: The ECM monitors vital engine functions and prevents engine damage by alerting the operator of: Overheating, Water in Fuel, Low Oil PSI, Battery, Over-Rev, Critical Engine Function.
  • IMPROVED CORROSION RESISTANCE: Repositioned anodes and a new bolt coating boost corrosion resistance
  • 4-FRONT CORROSION PROTECTION SYSTEM - FIGHTS THE ELEMENTS: A patented, "Double Sealed" multi-layered paint process. Sacrificial anodes and stainless steel technology, along with waterproof connectors, all enhance corrosion protection.
  • NMEA 2000 - ON-BOARD CONNECTIVITY: NMEA 2000 protocols allow engine data to be interfaced with on-board systems and systems displays, such as sonar or GPS.
  • PROVEN HONDA QUALITY: Our outboards share many technologies and components used in Honda vehicles, with all the benefits of years of proven Honda engineering, precision manufacturing and reliability.
  • TRUE 5 WARRANTY: Honda's True 5 Warranty is the best in the business. This transferable, non-declining warranty is the same on the last day as it is on the first.
  • SUPERIOR BATTERY CHARGING - MORE USABLE POWER: Honda's proven "on demand" 55 amp belt-driven alternator reduces heat buildup and provides 40 amps of battery charging capability.
  • VARIABLE SPEED TROLLING SWITCH: A variable speed trolling switch makes fishing easy and convenient. Simply push the toggle switch to adjust the trolling speed in 50 RPM increments from 650 RPM to 1000 RPM. Standard on iST models.
  • ENGINE COMMAND MODULE - OPTIMUM PERFORMANCE: The ECM receives constant input from 18 different sensors to deliver instant starts, smooth operation, strong performance and excellent fuel efficiency.
  • 3-WAY COOLING SYSTEM - COOL RUNNING DURABILITY: Three separate cooling systems keep the cylinder heads running cooler for long-term durability.
  • CONVENIENT SINGLE LATCH COWL: A single front-mounted latch combines with 4 securing points to ensure a water-tight seal.
  • FRESH WATER FLUSHPORT: Flushes debris and saltwater out of the engine, extending the life of the outboard.
  • ULTRA LOW 3 STAR CARB EMISSIONS: Environmentally conscious technology. All Honda Marine engines exceed the highest CARB 3-Star rating to meet the rigorous California Air Resource Board's standards.
  • COUNTER ROTATION AVAILABLE: Counter rotating models are available for multiple engine applications. These models improve efficiency, hull maneuverability and decreases driver fatigue.
  • Available in 20 and 25 inch shaft lengths